For this project you will need a large piece of PVC, a piece of truck inner tube, 8 medium grommets, and 8 screws.
Make a Simple Drum
Find a large section of PVC such as the elbow in the picture above.
Cut a piece of inner tube rubber two inches bigger around than the opening of the PVC.
Drill 8 holes around the PVC about 4 inches below the rim. Screw 8 screws into the holes. Leave the screws sticking out 1/4 inch.
Install 8 medium grommets around the inner tube circle about 1/2 inch from the edge.
Stretch the inner tube around the drum and hook the grommets onto the screw heads.
Your drum is done and ready to be played!